[av_textblock size=” font_color=” color=”]

Water Chiller Introduction of Optical Fiber Laser Cutting Machine

As fiber laser cutting machine becomes popular, people now are knowing more and better than before. But most of customers focus their attention on laser source(the core part) brand, rack and pinion, linear rail, machine body etc. They ignored one import component-the water chiller. Its function is to cool down laser head and laser source. Because of it, machine can work well and smoothly in cold or hot condition. Therefore, it is also very important part to measure.

https://youtu.be/q4p8LKSOq4A

As a fiber laser cutting machine supporting cooling equipment, chiller ensures that the fiber laser cutting machine works in the constant temperature state with the normal operation. Professional chillers of Fiber laser cutting machine are refrigeration type with industrial chillers, two modes of operation of constant temperature and intelligent thermostat. Temperature control accuracy is ± 0.3 ℃. Meanwhile there is Rich configurations, including input and output control equipment switch and cooling water flow, high and low temperature alarm advanced features, stable and durable, energy saving and environmental protection. In China market, Tongfei brand water chiller is a very qualified brand for fiber laser.

Precautions for use:

1, make sure that the power outlet is in good contact and that the ground is reliably grounded!
2, please ensure that the chiller operating voltage is stable, normal!
The refrigeration compressor on the power supply voltage is more sensitive to our standard products. the normal working voltage of 200~250V (110V models for the 100 ~ 130V). If you really need a wider operating voltage range, you can customize it separately.
3, the power frequency does not match the machine will lead to damage!
Please use 50Hz or 60Hz according to the actual situation.

Precautions for use:

4, in order to protect the circulating pump, no water running!
The new machine is empty before the storage tank, please ensure that the water tank after the water, otherwise the pump easily damaged. When the water level of the tank is below the green level of the water level gauge, the cooling capacity of the cooling machine will drop slightly. Please ensure that the water level of the tank is within the range of the water level on the water level gauge. Do not use circulating pump drainage!

5, please ensure that the chiller goes into the wind, the air channel smooth!
Chillers above the outlet from the obstacles to leave more than 1250px distance, the side of the inlet from the obstacle requirements from the distance of 500px or more.

Precautions for use:

6, the inlet of the filter must be regularly cleaned!
You must regularly wash off the dust filter, dusty network will cause serious clogging machine failure.

7, please note the effect of condensate!
When the water temperature is lower than the ambient temperature, and the ambient humidity is large, the circulating water pipe and the surface of the cooling device will produce condensate. When the above situation occurs, it is recommended to raise the water temperature or the water pipe and the cooling device for insulation.
8, this product is industrial equipment, do not allow non-professional operation.

Contact Information:

Email: xintian109@xtlaser.kr

Skype: xtlaser10

Mobil : 0086 18353156659(Whatsapp)

Web: www.xtlaser.kr
[/av_textblock]

[av_contact email=’xintian109@xtlaser.kr’ title=’Send us mail’ button=’Submit’ on_send=” sent=’Your message has been sent!’ link=’manually,http://’ subject=” autorespond=” captcha=” form_align=” color=”]
[av_contact_field label=’Name’ type=’text’ check=’is_empty’ options=” multi_select=” width=”][/av_contact_field]
[av_contact_field label=’E-Mail’ type=’text’ check=’is_email’ options=” multi_select=” width=”][/av_contact_field]
[av_contact_field label=’Subject’ type=’text’ check=’is_empty’ options=” multi_select=” width=”][/av_contact_field]
[av_contact_field label=’Message’ type=’textarea’ check=’is_empty’ options=” multi_select=” width=”][/av_contact_field]
[/av_contact]